R10 Man Portable Drill Rig

Man Portable Drill Rig
Low headroom drill rig
R10 Man Portable Drilling Unit

The R10 Mini-Tech has available setups for auger, mud or air drilling. These compact units are compatible with all drilling methods currently available. This lightweight unit is man & helicopter portable with low impact, turf friendly tires. These cost effective drill units provide flexibility and power, while maintaining portability and convenience.

  • MODEL: R10 Man Portable Drill
  • APPLICATIONS: Limited access, shallow bores, geotechnical, rock drilling.
SPECIFICATIONS
Power, Hydraulics & Dimensions
ROTARY HEADS : (D4 Drill Head is an available option)
Max Torque2,700 ft-lbs (3,660 Nm)
Max Speed80 rpm
Through BoreNA / Optional Side Port Swivel
SpeedsVariable - Optional Higher RPM Head
POWER & HYDRAULICS :
System Pressure2,900 psi (200 bar)
Max Flow27 gpm (102 lpm)
Max Pullback6,600 lbs (2,993 kg)
EngineGas Engine
Engine Power20hp / 2,900 PSI
Fuel TankUp to 6 gallons (22 L)
Hydraulic TankUp to 25 gallons (94 L)
R10 MINI TECH DIMENSION :
Height104" (2,629 mm)
Weight926 lbs (420 kg)*
POWER UNIT DIMENSION :
Length35" (889 mm)
Width21" (534 mm)
Height29" (737 mm)

* Dependant on options / Additional upgrades may be required. Subject to change

Standard Features & Options
R10 : STANDARD FEATURES
Drill Head - 1,000 ft-lbs Torque / Max 80 RPM.
6 ft Stroke Mast for 5ft rods.
Hydraulic Mast Cylinder - 6,000 lbs pullback/pushdown.
Man-Portable with Low Impact tires for rough terrain.
2-Hydraulic Controls for Drill Operation & Lift.
AVAILABLE OPTIONS :
Air Drilling Rods & Adaptors. (clamps may be required).
Mud Drilling Rods & Adaptors. (clamps may be required).
Breakout Clamps c/w hand-wrench for drill rods.
Remote Controls. Rotation & Feed.
Inline Side-Swivel, 2" for air compressor/water flushing.
Trip Wire Safety System. (European Spec).
Mast Mounted Flood Lights.*
Mono Mud Pump. 150-180 gpm / 300-800 psi.*
Foot Plate and Hydraulic Auger Holder. (Replaces clamps).
D5 Drill Head - 1,280 ft-lbs Torque / Max 480 RPM
D6 Drill Head - 1,420 ft-lbs Torque / Max 380 RPM